Agave Ironworks [RH901] Rolling Track Barn Door Bottom Stabilizers - Pair

Rolling Track Barn Door Hardware Component

Flat track door bottom stabilizer(s) are recommended for most doors to keep the door from swinging into the opening or against a wall, but are not required or applicable in all installations.

• Sold as Pair
• (2) Stabilizers - 3" L x 1 1/2" H x 1 1/2" D
• (4) Flat Phillips Head Screws - 1/4" x 1 1/2"
• Available in 9 Finishes: Brilliant White, Corvette Yellow, Dark Bronze, Faux Stainless, Ferrari Red, Flat Black, Industrial Raw/Brushed, Rustic Brown, Rustic Red

Installation Options (see notes below):

• METHOD 1: Using a single Door Bottom Stabilizer that fits into a 1/4" routered guide (groove) in your door bottom and holds the door in a vertical position. NOTE: The groove should be cut on the bottom of the door prior to wheel carrier system installation and fitment on the track.
• METHOD 2: Use two Door Bottom Stabilizers (one on each side of the door). This method can be used when you are unwilling or unable to create an appropriate guide (groove) in the bottom edge of your door.

If you are using Installation Method 2, consider "stick-on" felt or similar soft liner placed on the Door Bottom Stabilizers between the door and the stabilizer for smoother operation and to protect the bottom edge of your door.